Bypass PDU Recommended for Maintaining Continuous Power During UPS Maintenance Keeping missioncritical data center equipment operating at its optimal level often means scheduled maintenance. But what if you are unable to afford the costly downtime involved in powering down for regular upkeep? This 220240V 16A singlephase hotswap PDU works in conjunction with your UPS system to keep everything running 24/7/365. It allows you to manually transfer connected equipment to utility power via the PDU’s bypass switch, permitting maintenance or equipment replacement with no interruption of performance. Features Dual Inputs and a Manual Transfer Switch for Uninterrupted Operation The PDUBHV20D features two C20 inlets that connect to separate UPS and utility input power sources with usersupplied power cables or the included cables. The manual transfer switch allows PDU output power to flow from either input. Flip the switch to Bypass to replace the UPS and flip back to Normal once the maintenance or UPS replacement is complete. Equipment connected to the four Schuko outlets will continue to operate without interruption. Optional ECO Switching Feature Enables CostCutting Power Savings By enabling the ECO power saving feature, you can power off a single bank of three controlled Schuko outlets all at once when the device connected to the master Schuko outlet is powered off or goes into a lowpower consumption mode. Mounts into 2U of Rack Space or on a Wall Use the included mounting hardware to install the PDUBHV20D’s allmetal housing inside a 19inch rack. Because the PDU’s 56.1millimeter height is larger than 1U in an EIAstandard rack, you will need to mount the unit into 2U of space. You may also use the mounting brackets to secure the PDU to a wall.
Brand
- Tripp Lite
