The ATEN NRGence PE5342TG eco PDU is thin form factor intelligent PDU that contain 42 IEC outlets. The lightweight thin form factor PDUs' 5.6 cm width fits tight into server racks, providing more space in the rack to increase air flow and cooling efficiency. This also means faster maintenance thanks to easier access to equipment installed behind PDUs.
NRGence eco PDUs offers real-time power measurement–allowing you to monitor the power status of devices attached to the PDUs, at the PDU and Bank level, from practically any location via a TCP/IP connection.
With the combination of ATEN eco PDUs and eco Sensors, an administrator’s data center is equipped with real time monitoring, measurements and analysis that can produce reports of power usage, PUE, RCI and RTI to meet the ISO 50001 requirements. With these critical indexes, you can generate customized reports about your data center that include energy saving suggestions. Following these suggestions allows you to optimize energy usage to save energy without harming your IT equipment’s reliability. eco Sensors provides you with an easy method for managing multiple devices, offering an intuitive and user-friendly Graphical User Interface that allows you to configure a PDU device and monitor power status of the equipment connected to it.
NRGence eco PDUs offers real-time power measurement–allowing you to monitor the power status of devices attached to the PDUs, at the PDU and Bank level, from practically any location via a TCP/IP connection.
With the combination of ATEN eco PDUs and eco Sensors, an administrator’s data center is equipped with real time monitoring, measurements and analysis that can produce reports of power usage, PUE, RCI and RTI to meet the ISO 50001 requirements. With these critical indexes, you can generate customized reports about your data center that include energy saving suggestions. Following these suggestions allows you to optimize energy usage to save energy without harming your IT equipment’s reliability. eco Sensors provides you with an easy method for managing multiple devices, offering an intuitive and user-friendly Graphical User Interface that allows you to configure a PDU device and monitor power status of the equipment connected to it.
Certification
- CE, CE-LVD
AC Outlets Quantity
- 42 AC outlet(s)
PDU Types
- Metered
Nominal Input Voltage
- 100-240 V
Maximum Current
- 32 A
Load Capacity
- 7360 VA
AC Outlet Types
- C13 coupler, C19 coupler
Rack Capacity
- 0U
Supported Network Protocols
- TCP/IP, UDP, HTTP, HTTPS, SSL, DHCP, SMTP, NTP, DNS, Auto Sense, Ping, Telnet, SNMP V1,V2&V3
AC Input Frequency
- 50-60 Hz
Ethernet LAN (RJ-45) Ports
- 1
Storage temperature (T-T)
- -20 - 60 °C
Operating relative humidity (H-H)
- 0 - 80%
Operating temperature (T-T)
- 0 - 40 °C
Cable length
- 3 m
Weight
- 5.57 kg
Depth
- 56 mm
Width
- 1775 mm
Height
- 48 mm
Product colour
- Black
Brand
- ATEN
UK Address:
466 Malton Avenue,
Slough,
SL1 4QU,
United Kingdom
Website (UK): www.aten.com/eu/en
Email (UK): support@aten.co.uk
EU Address:
Mijnwerkerslaan 34,
3550 Heusden-Zolder,
Belgium
Website (EU): www.aten.com/gb/en
Email (EU): support@aten.be
Aten GPSR Compliance Statement
This product complies with the General Product Safety Regulation (GPSR) and meets all relevant EU safety standards.
For detailed compliance documents, please review the provided link above.
If you have any questions or require further assistance, you can:
- Contact the manufacturer directly at the listed addresses or support emails.
- Email Northamber Product Safety at productsafety@northamber.com.
