With configurable per-port power distribution, our Gigabit 12-port switch is the ideal solution for variable power deployments, such as point/tilt/zoom cameras, lighting controllers, and point-of-sale kiosks.
The AT-IE300-12GP is a Power over Ethernet Power Sourcing Device (PoE PSD), which is compliant with IEEE802.3af and IEEE802.3at standards.
Each port supplies either 15.40W PoE with 12.95W available to the powered device, or 30.00W PoE+ with 25.50W available to the powered device.
Four ports are configurable for Hi-PoE (also known as Ultra PoE, High PoE, PoE++, and others because there is no current standard), which uses all four pairs in the cable to provide up to 60W—double the capacity of PoE+.
You can configure the overall power budget and the power feeding limit on a per-port basis, to establish a close relationship between the power sourcing feature with the real capabilities of the external Power Supply Unit (PSU).
Enabling the unique High Availability Network Power (HANP) feature, the switch retains PoE sourcing during restart events, such as those due to operator command, software exception, watchdog timeout or diagnostic failures. The restart event is not propagated to the end devices, and camera operation is not affected.
The AT-IE300-12GP is a Power over Ethernet Power Sourcing Device (PoE PSD), which is compliant with IEEE802.3af and IEEE802.3at standards.
Each port supplies either 15.40W PoE with 12.95W available to the powered device, or 30.00W PoE+ with 25.50W available to the powered device.
Four ports are configurable for Hi-PoE (also known as Ultra PoE, High PoE, PoE++, and others because there is no current standard), which uses all four pairs in the cable to provide up to 60W—double the capacity of PoE+.
You can configure the overall power budget and the power feeding limit on a per-port basis, to establish a close relationship between the power sourcing feature with the real capabilities of the external Power Supply Unit (PSU).
Enabling the unique High Availability Network Power (HANP) feature, the switch retains PoE sourcing during restart events, such as those due to operator command, software exception, watchdog timeout or diagnostic failures. The restart event is not propagated to the end devices, and camera operation is not affected.
Certification
- RoHS, China RoHS, WEEE, CE, FCC
Switching capacity
- 24 Gbit/s
Forwarding rate
- 17.8 Mpps
Latency (10-100 Mbps)
- 7.9 µs
Latency (10 Gbps)
- 54 µs
Jumbo frames support
- Yes
Jumbo frames
- 9000
Packet buffer memory
- 1.5 MB
Multicast support
- Yes
International Protection (IP) code
- IP30
MAC address table
- 16000 entries
Internal memory
- 512 MB
Flash memory
- 64 MB
DC Input Voltage
- 48 V
Power Supply Included
- Yes
Power Consumption (max)
- 320 W
Power over Ethernet (PoE)
- Yes
Power over Ethernet plus (PoE+) Ports Quantity
- 8
Total Power over Ethernet (PoE) budget
- 240 W
Traffic classification
- Yes
Product colour
- Black, Grey
Height
- 152 mm
Width
- 146 mm
Depth
- 127 mm
Weight
- 2 kg
Networking standards
- IEEE 802.2, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
VLAN support
- Yes
Switch type
- Managed
Switch layer
- L3
Traffic shaping
- Yes
ARP inspection
- Yes
Basic switching RJ-45 Ethernet ports quantity
- 12
Basic switching RJ-45 Ethernet ports type
- Gigabit Ethernet (10/100/1000)
Gigabit Ethernet (copper) ports quantity
- 8
SFP module slots quantity
- 4
10G support
- No
Number of VLANs
- 4000
Brand
- Allied Telesis
Allied Telesis Inc.
UK Address:
11 Pine Court,
Swindon,
SN2 8AD,
United Kingdom
Website: www.alliedtelesis.com
Airtame Support: helpdesk@alliedtelesis.com
This product complies with the General Product Safety Regulation (GPSR) and meets all relevant EU safety standards.
For detailed compliance documents, please review the provided link above.
If you have any questions or require further assistance, you can:
- Contact the manufacturer directly at the listed addresses or support emails.
- Email Northamber Product Safety at productsafety@northamber.com.
