Extended Networks
The Allied Telesis Industrial Media Converter (IMC) Series is designed to extend the distance of a network by converting data between twisted pair cabling and multi-mode or singlemode fiber-optic cabling. The IMC100 features a 100FX fixed SC fiber port, while the IMC1000 features an SFP port for maximum flexibility.
VLAN Support
Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. IMC Series switches are fully compatible with these long packets, enabling them to be used in modern networks. Switches not supporting this feature will discard these extra-long packets, making them unsuitable for modern networks.
Small and Flexible
The small size and dual external power supply inputs of the IMC Series allows them to be used almost anywhere in harsh environmental conditions. Additionally, they can be mounted both on DIN rail (EN50022) or by wall-mount, allowing users to deploy any mix of network conversions required.
The Allied Telesis Industrial Media Converter (IMC) Series is designed to extend the distance of a network by converting data between twisted pair cabling and multi-mode or singlemode fiber-optic cabling. The IMC100 features a 100FX fixed SC fiber port, while the IMC1000 features an SFP port for maximum flexibility.
VLAN Support
Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. IMC Series switches are fully compatible with these long packets, enabling them to be used in modern networks. Switches not supporting this feature will discard these extra-long packets, making them unsuitable for modern networks.
Small and Flexible
The small size and dual external power supply inputs of the IMC Series allows them to be used almost anywhere in harsh environmental conditions. Additionally, they can be mounted both on DIN rail (EN50022) or by wall-mount, allowing users to deploy any mix of network conversions required.
Ethernet LAN Data Rates
- 10,100,1000 Mbit/s
Connectivity technology
- Wired
Wavelength
- 1310 nm
LED indicators
- Activity, Link, PoE, Power
Storage temperature (T-T)
- -40 - 85 °C
Operating altitude
- 0 - 2000 m
Jumbo frames support
- Yes
International Protection (IP) code
- IP31
Power over Ethernet plus (PoE+) Ports Quantity
- 1
Fiber optic connector
- SFP
Copper Ethernet Cabling Technology
- 100BASE-TX, 1000BASE-TX
Stacked VLAN
- Yes
Auto-negotiation
- Yes
Store-and-forward
- Yes
Ethernet LAN (RJ-45) Ports
- 1
Fiber Ports Quantity
- 1
DIN Rail Mounting
- Yes
Compliance Certificates
- RoHS
Operating relative humidity (H-H)
- 5 - 95%
Product colour
- Grey
Housing material
- Metal
Height
- 108 mm
Width
- 36 mm
Depth
- 95 mm
Weight
- 500 g
Power consumption (typical)
- 32.73 W
Operating temperature (T-T)
- -40 - 75 °C
Maximum data transfer rate
- 1000 Mbit/s
Converter input interface
- 10Base-T, 1000Base-T
Converter output interface
- 100Base-X, 1000Base-X
Networking standards
- IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ethernet interface type
- Fast Ethernet, Gigabit Ethernet
VLAN support
- Yes
Auto MDI/MDI-X
- Yes
Duplex system
- Full, Half
Brand
- Allied Telesis
Allied Telesis Inc.
UK Address:
11 Pine Court,
Swindon,
SN2 8AD,
United Kingdom
Website: www.alliedtelesis.com
Airtame Support: helpdesk@alliedtelesis.com
This product complies with the General Product Safety Regulation (GPSR) and meets all relevant EU safety standards.
For detailed compliance documents, please review the provided link above.
If you have any questions or require further assistance, you can:
- Contact the manufacturer directly at the listed addresses or support emails.
- Email Northamber Product Safety at productsafety@northamber.com.
