This desktop media converter features 1000T to 1000SX conversion with ST multi-mode fiber connector supporting a distances from 220m to 550m. At just 1.25 inches wide × 3.6 inches deep × 0.85 inches high, this media converter can easily fit into the palm of a hand.
Fiber cable diameters supported (core/cladding)
- 50/125,62.5/125 µm
VLAN support
- Yes
Auto MDI/MDI-X
- Yes
Duplex system
- Full, Half
Fiber optic connector
- ST
Connectivity technology
- Wired
Maximum transfer distance
- 550 m
Wavelength
- 850 nm
Fiber mode structure
- Multi-mode
Packet forwarding rate (1 Gbps)
- 1488000 pps
Tx power (min)
- -9.5 dBmW
Tx power (max)
- -4 dBmW
Rx power (min)
- -17 dBmW
Internal
- No
LED indicators
- Yes
Storage temperature (T-T)
- -15 - 65 °C
Storage relative humidity (H-H)
- 5 - 95%
Operating altitude
- 0 - 3048 m
Operating relative humidity (H-H)
- 5 - 95%
Product colour
- Grey
Height
- 21.6 mm
Width
- 31.8 mm
Depth
- 91.4 mm
Weight
- 113 g
Data transfer rate
- 1000 Mbit/s
Power consumption (typical)
- 1.5 W
Operating temperature (T-T)
- 0 - 40 °C
Maximum data transfer rate
- 1000 Mbit/s
Converter input interface
- 1000Base-T
Converter output interface
- 1000Base-SX
Networking standards
- IEEE 802.1Q
Ethernet interface type
- Gigabit Ethernet
Packet forwarding rate (10 Mbps)
- 14880 pps
Packet forwarding rate (100 Mbps)
- 148800 pps
Brand
- Allied Telesis
Allied Telesis Inc.
UK Address:
11 Pine Court,
Swindon,
SN2 8AD,
United Kingdom
Website: www.alliedtelesis.com
Airtame Support: helpdesk@alliedtelesis.com
This product complies with the General Product Safety Regulation (GPSR) and meets all relevant EU safety standards.
For detailed compliance documents, please review the provided link above.
If you have any questions or require further assistance, you can:
- Contact the manufacturer directly at the listed addresses or support emails.
- Email Northamber Product Safety at productsafety@northamber.com.
