Tripp Lites 32.8ft. (10 m) USB 3.0 active extension cable is a bus powered extension cable that can be used to increase the length of a device cable without the worry of signal loss and potential performance problems. Increase the extension distance to 65.61ft. (20 m) by connecting two U33010M together. USB limits a cables length to 16ft. (4.88 m). Any length above 16ft. (4.88 m) requires the use of an active cable such as this one. This cable has a signal booster built in. The cable must be plugged directly into a USB port (either on the PC or a hub). Use a standard 6ft. (1.83 m), 10ft. (3.05 m), or 15ft. (4.57 m) USB 3.0 AB cable to reach the desired distance. The U33010M provides up to 120mA of power to the connected device. If your device requires more than 120mA of power, an external power supply will be required. The U33010M accepts a 5V, 2A power supply with a 3.5 x 1.35mm DC jack. The output plug on the power supply should have a positive tip and a negative sleeve. Extend a USB 3.0 signal 32.8ft. (10 m) Increase the extension distance to 65.61ft. (20 m) by connecting two U33010M together Works together with standard USB 3.0 cables Provides up to 120mA of power to the connected device. If your device requires more than 120mA of power, an external power supply will be required. Accepts a 5V, 2A power supply with a 3.5 x 1.35mm DC jack. The output plug on the power supply should have a positive tip and a negative sleeve. Backward compatible to previous USB generations
Brand
- Tripp Lite
