Save installation time and money with PoE.
The Intellinet Network Solutions 16-Port Gigabit Ethernet Rackmount PoE+ Switch (560993) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 16 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1,000 Mbps.
Power over Ethernet 802.3at
The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.
Extreme Throughput
With a backplane speed of 32 Gbps, there is plenty of performance available for your computers, servers and other networking devices.
* Total PoE budget for this switch is 220 watts.
The Intellinet Network Solutions 16-Port Gigabit Ethernet Rackmount PoE+ Switch (560993) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 16 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1,000 Mbps.
Power over Ethernet 802.3at
The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.
Extreme Throughput
With a backplane speed of 32 Gbps, there is plenty of performance available for your computers, servers and other networking devices.
* Total PoE budget for this switch is 220 watts.
Basic switching RJ-45 Ethernet ports type
- Gigabit Ethernet (10/100/1000)
Power over Ethernet (PoE) Type Supported
- PoE+
Rack Mount Kit
- Yes
Power Connector
- DC-in jack
AC Input Frequency
- 50 - 60 Hz
AC Input Voltage
- 100 - 240 V
Store-and-forward
- Yes
Copper Ethernet Cabling Technology
- 10BASE-T, 100BASE-TX, 1000BASE-T
Rack Mounting
- Yes
Full Duplex
- Yes
Power over Ethernet (PoE)
- Yes
Power Consumption (max)
- 260 W
Certification
- FCC Class B, VCCI Class A, CE, RoHS
Switching capacity
- 32 Gbit/s
MAC address table
- 8192 entries
10G support
- No
Basic switching RJ-45 Ethernet ports quantity
- 16
Storage temperature (T-T)
- -20 - 70 °C
LED indicators
- Yes
Networking standards
- IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Cables included
- AC
Operating relative humidity (H-H)
- 10 - 90%
Operating temperature (T-T)
- 0 - 40 °C
Weight
- 3.8 kg
Package type
- Box
Depth
- 208 mm
Width
- 442 mm
Height
- 44 mm
Housing material
- Metal
Product colour
- Black
Brand
- Intellinet
