The 2A-130G VGA EDID Emulator is designed for ATEN KVM extender or video extender installations that do not utilize a local monitor at the site where the computer/video source is located. The 2A-130G emulates and stores a default ATEN EDID (Extended Display Identification Information) setting in a non-volatile memory. This means the computer/video source can still "see" the display, even though it is not directly connected.
The 2A-130G is suitable for any ATEN KVM or video extender installation where a monitor is not required at the local site, providing a simple, cost-saving, and convenient solution for display-related boot-up problems.
The 2A-130G is suitable for any ATEN KVM or video extender installation where a monitor is not required at the local site, providing a simple, cost-saving, and convenient solution for display-related boot-up problems.
Connector 2
- VGA (D-Sub)
Maximum Refresh Rate
- 60 Hz
Supported Graphics Resolutions
- 1366 x 768, 1920 x 1200 (WUXGA)
Maximum Resolution
- 1920 x 1200 pixels
Storage temperature (T-T)
- -20 - 60 °C
Operating relative humidity (H-H)
- 0 - 80%
Operating temperature (T-T)
- 0 - 50 °C
Package weight
- 52 g
Connector 2 form factor
- Straight
Connector 1 form factor
- Straight
Connector 2 gender
- Male
Connector 1 gender
- Male
Connector 1
- USB Type-A
Cable length
- 0.35 m
Weight
- 40 g
Depth
- 65.9 mm
Width
- 34 mm
Height
- 16 mm
Harmonized System (HS) code
- 84733080
Package height
- 20 mm
Package depth
- 245 mm
Package width
- 205 mm
Product colour
- Blue, Silver
Brand
- ATEN

UK Address:
466 Malton Avenue,
Slough,
SL1 4QU,
United Kingdom
Website (UK): www.aten.com/eu/en
Email (UK): support@aten.co.uk
EU Address:
Mijnwerkerslaan 34,
3550 Heusden-Zolder,
Belgium
Website (EU): www.aten.com/gb/en
Email (EU): support@aten.be
This product complies with the General Product Safety Regulation (GPSR) and meets all relevant EU safety standards.
For detailed compliance documents, please review the provided link above.
If you have any questions or require further assistance, you can:
- Contact the manufacturer directly at the listed addresses or support emails.
- Email Northamber Product Safety at productsafety@northamber.com.