Cat6 Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls This complete wallplatestyle transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. Both the transmitter and receiver have a singlegang metal wall plate design with a metal back cover and blend perfectly into the room décor. Extends a 4K A/V Transmission up to 230 ft....or Even Farther The B127A1A1FDFH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet (70.1 meters) away via usersupplied Cat6 cabling. By adding a Tripp Lite B127A010H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters). Transmits CrystalClear 4K Video with MultiChannel Audio and 4:4:4 Color The B127A1A1FDFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified in HDMI 2.0, with passthrough LPCM 2.0/5.1/7.1 audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for toplevel PC gaming or using your HDTV as a PC monitor. Builtin equalization automatically finetunes the image quality at the remote display. BuiltIn PoC Technology Provides Power to Avoid Bulky External Power Bricks After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to install the application where best needed without worrying about finding a nearby AC outlet. Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a usersupplied HDMI cable. This port does not support multiresolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly. PlugandPlay Operation for Quick Setup and Immediate Use The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a usersupplied DisplayPort cable (such as Tripp Lite’s P580Series). Then, connect the receiver to the display with a usersupplied HDMI cable (such as Tripp Lite’s P569XXXCERT or P568XXX2A). Finally, connect the two units with usersupplied Cat6 patch cable (such as Tripp Lite N202Series). Mounting hardware is included for both units. TAACompliant for GSA Schedule Purchases The B127A1A1FDFH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Brand
- Tripp Lite
