4Port MultiFormat Presentation Switch Connects 4 Video Sources to One HDMI Display This presentation switch connects four separate source devices to your 4K television, projector or monitors HDMI input and switches between them. It then transmits the audio/video signals through Cat6 cable to the included receiver located up to 125 feet (38.1 meters) away. HDMI, DisplayPort, USBC and VGA + Audio inputs connect Windows laptops, cable boxes, media servers, Bluray players, game consoles and other sources. Switch from one source to another using the manual push buttons, RS232 commands or the included remote control. Suitable for a Wide Range of Audio/Video Applications for Work or Play This kit is recommended anywhere a variety of video signals is transmitted to a hidef display. It is suitable for home theaters, video and multimedia presentations, or digital signage applications in classrooms, bars, restaurants, conference rooms, lecture halls, exhibition centers and trade shows. Transmits CrystalClear 4K Video with HDR, 4:4:4 Color and 7.1Channel Audio The HDMI, DisplayPort and USBC ports support UHD 4K resolutions up to 3840 x 2160 at 60 Hz, as well as HDR video, providing a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This switch also supports 4:4:4 chroma subsampling for toplevel PC gaming or using your HDTV as a PC monitor. Full, rich, uncompressed DTSHD, Dolby TrueHD and 7.1channel digital surround sound ensure your ears receive the same treat as your eyes. The VGA port supports HD video up to 1920 x 1080 (1080p) at 60 Hz. Remote Receiver Works Up to 125 ft. Away The presentation switch connects to the included passive remote receiver with a usersupplied Cat6 cable (sold separately). The boxstyle receiver extends 4K video and digital audio signals to an HDMI display up to 125 feet away from the switch. BuiltIn PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks Power over Cable (PoC) technology powers the remote receiver over Cat6 cable. Green and orange LEDs will light up to indicate the system is receiving sufficient power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver away from an AC outlet. PD 3.0 Charging Port Charges the USBC Source to Avoid Battery Drain and Signal Loss The USBC Power Delivery port provides up to 20V 5A (100W), of which 90W is used to charge and power the connected USBC device, such as a MacBook Pro or Windows laptop. Connect the devices power supply or power adapter between the USBC PD 3.0 port and an available AC outlet to prevent the source from running out of power prematurely. PlugandPlay Operation for Quick Setup and Immediate Use The switch works right out of the box with no software required. Mounting hardware is included for installing the switch and receiver on a wall, pole or 19inch rack. Connect your devices to the switchs ports with usersupplied cables (sold separately), and plug the switchs external power supply into an AC power source. TAACompliant for GSA Schedule Purchases The B3204X1MHEK is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Brand
- Tripp Lite
